adidas PILLARFORCE FX

Steel pillar padel court with 10 mm safety glass, outward-tilted light masts and the IFS® installation system.

TypeDouble
Court size10 × 20 m
SeriesPILLARFORCE
ManufacturerAFP Courts

adidas PILLARFORCE FX – Technical view 1

adidas PILLARFORCE FX – Technical view 2

adidas PILLARFORCE FX – Technical view 3

adidas PILLARFORCE FX – Technical view 4

1 / 7

The model

Why the PILLARFORCE FX.

The PILLARFORCE FX is a steel pillar court (min. S235JR) with 100×50×2 mm pillars, designed according to UNE 147201:2024 with structural calculations according to Eurocodes. The upper part of the light masts tilts outwards so that the floodlights do not interfere with play or the flight of the ball. The Insert Fixation System (IFS®) separates the anchor plates from the pillars and makes transport and installation easier.

Steel pillars 100×50×2 mm (S235JR)
10 mm toughened glass, 18 panes of 3×2 m
Light masts tilted outwards at the top
IFS® system, anchor plates with KTL (C5M)
adidas authenticity plaque with serial number

Data sheet

Technical data

Specifications from the manufacturer AFP Courts – you can download the full data sheet here as a PDF. Detailed drawings and structural calculations on request.

Data sheet as PDF

Court size: 10 × 20 m (Double)
Dimensions: Dimensions according to the IPF padel rules (double court); outer dimensions per technical drawing 10.060 × 20.030 m
Structure: Steel pillars 100×50×2 mm, steel min. S235JR (UNE-EN 10025-1), welded in a certified factory (UNE-EN 15614); adidas net posts 160×80 mm; light masts with decorative reinforcement and an outward-tilted upper part; light mast anchor plate 250×310 mm
Glass: 10 mm toughened safety glass (ESG), 18 panes of 1995×2995 mm (3×2 m modules); UNE-EN 12150, impact/breakage resistance type C according to UNE-EN 12600:2003, CE marking; fixed via countersunk holes with A4 stainless steel screws (DIN 7991 M8×35, DIN 985, DIN 9021), PE cone and neoprene/rubber 5–8 mm clearance from the structure
Mesh: Rigid welded steel mesh 50×50×4 mm (UNE-EN 10223-4), frames made from 40×25 mm and 40×10 mm tubes; continuously folded 3×2 m mesh panels as an anti-injury system
Lighting: Options per data sheet: LED floodlight 210 W, 240 LEDs, 30429 lm, 4000 K, 145 lm/W, IP66/IK08; or AFP Modular Lineal Lighting 240/320/500 W, up to 38400/51200/80000 lm, 5000 K, IP66/IK10. Number per court not specified
Finish: Pillars and mesh with oven-cured polyester powder coating (pre-treatment incl. Nébula passivation, zinc-free epoxy primer with HDC technology); corrosion protection of the structure C4 according to UNE-EN ISO 12944-2:2018; anchor plates with cataphoretic coating (C5M)
Anchoring: Insert Fixation System (IFS®, utility model ES1294253U): anchor plates separate from the pillars; ground anchoring with M16×145
Standards: UNE 147201:2024; structural design according to Eurocodes (UNE-EN 1993, UNE-EN 1090); UNE-EN 10025-1; UNE-EN 15614; UNE-EN 10223-4; glass UNE-EN 12150, UNE-EN 12600:2003, UNE-EN 12150-2:2005 (CE); UNE-EN ISO 12944-2:2018; dimensions according to IPF rules
Other: Padel net 3 mm thick, 45 mm mesh, incl. fixing system; adidas branding on net posts, 9 cm net band, glass, light masts and corner pillars; certificate of authenticity with serial number. Warranty: anchor plates with KTL 15 years, steel parts without KTL 5 years, glass 5 years, AFP Modular lighting 5 years, Beghelli floodlights 4 years