Why the High Competition.

The High Competition is built on a lower perimeter ring of 14 profiles 100×50×2 mm, to which the pillars and glass holders are bolted. Two panoramic portals on the end walls, curved light masts and 12 mm glass define the court. It has two access openings according to federation requirements, with a World Padel Tour exit at a height of 2.20 m.

Perimeter floor ring, 14 profiles
2 panoramic portals on the end walls
12 mm toughened glass, 18 panes
2 accesses, WPT exit at 2.20 m
Concealed robotic welding

Data sheet

Technical data

Specifications from the manufacturer AFP Courts – you can download the full data sheet here as a PDF. Detailed drawings and structural calculations on request.

Data sheet as PDF

Court size: 10 × 20 m (Double)
Dimensions: Dimensions according to the IPF padel rules (double court)
Structure: Lower perimeter ring (except access area) made of 14 parts, profile 100×50×2 mm; 4 light masts 100×50×2 mm (lower part 3.00 m, reinforcement up to 1 m) with curved upper part 50×50×3 mm (3.31 m); 36 rounded L-shaped glass holders, 8 glass holders 70×70 mm; 8 anchor plates with mesh reinforcement (1.15 m, 3 mm steel sheet); 2 net posts 160×80×2 mm (1.00 m) with anchor plate 220×195×10 mm; 2 panoramic portals (centre section 6.00 × 1.00 m, side sections 2.00 × 1.00 m and 3.50 × 1.00 m, L-shaped corner profiles, three-part handrail); steel min. S235JR
Glass: 12 mm toughened safety glass (ESG), 18 modules of 3×2 m: 14 panes 1995×2997 mm (model A), 2 panes 2010×2997 mm (B), 2 panes 2010×2997 mm (C); UNE-EN 12150, type C according to UNE-EN 12600:2003 (1C1), 200 K, CE marking; fixed with stainless steel screws, PE cone and neoprene/rubber 5–8 mm
Mesh: Welded steel mesh 50×50/4 made from 3.8 mm galvanised wire (UNE-EN 10223-4), framed with 40×4 mm handrail profiles; folding system at the light masts (anti-injury system); all welding done in the factory, no welding on site
Lighting: Options per data sheet: LED floodlight 210 W, 240 LEDs, 30429 lm, 4000 K, IP66/IK08; or AFP Modular Lineal Lighting 240/320/500 W, up to 38400/51200/80000 lm, 5000 K, IP66/IK10. Number per court not specified
Access: Two access openings according to the padel federation’s requirements, World Padel Tour exit at a height of 2.20 m
Finish: Pillars and mesh with oven-cured polyester powder coating (Nébula passivation, zinc-free epoxy primer with HDC technology); corrosion protection of the structure C4 according to UNE-EN ISO 12944-2:2018
Anchoring: Floor ring fixed to the ground with 12 rounded Z-pieces; ground anchoring with expansion anchors M16×145
Standards: UNE 147201:2024; structural design according to Eurocodes (UNE-EN 1993, UNE-EN 1090); UNE-EN 10025-1; UNE-EN 15614; UNE-EN 10223-4; glass UNE-EN 12150, UNE-EN 12600:2003, UNE-EN 12150-2:2005 (CE); UNE-EN ISO 12944-2:2018; dimensions according to IPF rules
Other: Padel net 3 mm thick, 45 mm mesh; adidas branding on net posts, reinforced anchor plates, 9 cm net band, glass and light masts; authenticity plaque with serial number. The data sheet contains acceptance criteria for glass defects. Warranty: steel parts 5 years, glass 5 years, AFP Modular lighting 5 years, Beghelli floodlights 4 years